ISO 2982-1/-2 Adapter/withdrawal sleeves; locknuts
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- ISO 2982-1:2013; ISO 2982-2:2013
- Publisher
- ISO
- Part family
- Bearings
- Reviewed
- 23 October 2026 · source checked
Is ISO 2982-1/-2 still current?
Yes. ISO 2982-1:2013; ISO 2982-2:2013 is the latest edition MechAtlas found (MechAtlas review: 23 October 2026). Check the publisher for amendments before you specify it.
What it covers
Adapter/withdrawal sleeves; locknuts
Equivalent and related standards
| Standard | Relationship | Note |
|---|---|---|
| DIN 5415 / DIN 981 | Similar purpose — not interchangeable without an engineering check |
“Similar” never means interchangeable without an engineering check.
Parts that use ISO 2982-1/-2
- Adapter sleeve, withdrawal sleeve and locknut (ISO / EN, main)
Tapered sleeve with locknut that fixes a tapered-bore bearing on a plain shaft; used with plummer blocks on conveyors and fans.
Part 1 sleeves; part 2 locknuts and locking devices.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ISO 2982-1/-2 or the ISO store.
Open in MechAtlasCheck a drawing callout
Other bearings standards
- ISO/TS 16281 Replaced
Advanced rating life calculation - ISO 15243 Changing
Bearing damage and failure terms and causes - ISO 281 Changing
Rolling bearing rating life - ISO 5753-1 Changing
Radial internal clearance - ISO 76 Changing
Static load ratings - ANSI/ABMA 20 Current
Metric radial ball and roller bearings - ANSI/ABMA 4 Current
Tolerance definitions and gauging - ANSI/ABMA 8.2 Current
Locknuts, sleeves, locking devices (inch) - ANSI/ABMA 9 Current
Load ratings and fatigue life for ball bearings - DIN 5415 Current
Rolling bearings - adapter sleeves - DIN 625-1 Current
Radial deep groove ball bearings, single row - DIN 736 Current
Plummer block housings for diameter series 2 bearings