DIN 736 Plummer block housings for diameter series 2 bearings
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- DIN 736:2011-06
- Publisher
- DIN
- Part family
- Bearings
- Reviewed
- 27 October 2026 · source checked
Is DIN 736 still current?
Yes. DIN 736:2011-06 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
German plummer block housings for series 2 bearings with tapered bore and adapter sleeve.
Parts that use DIN 736
- Plummer block housing (pillow block) (Germany (DIN), main)
Split cast housing bolted to a base that holds a rolling bearing, usually on an adapter sleeve; used on conveyor pulleys, fans and line shafts.
Housings for diameter series 2 bearings with adapter sleeve.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 736 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other bearings standards
- ISO/TS 16281 Replaced
Advanced rating life calculation - ISO 15243 Changing
Bearing damage and failure terms and causes - ISO 281 Changing
Rolling bearing rating life - ISO 5753-1 Changing
Radial internal clearance - ISO 76 Changing
Static load ratings - ANSI/ABMA 20 Current
Metric radial ball and roller bearings - ANSI/ABMA 4 Current
Tolerance definitions and gauging - ANSI/ABMA 8.2 Current
Locknuts, sleeves, locking devices (inch) - ANSI/ABMA 9 Current
Load ratings and fatigue life for ball bearings - DIN 5415 Current
Rolling bearings - adapter sleeves - DIN 625-1 Current
Radial deep groove ball bearings, single row - DIN 737 Current
Plummer block housings for diameter series 3 bearings