ANSI/ABMA 4 Tolerance definitions and gauging
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- 2025
- Publisher
- ABMA
- Part family
- Bearings
- Reviewed
- 22 October 2026 · source checked
Is ANSI/ABMA 4 still current?
Yes. 2025 is the latest edition MechAtlas found (MechAtlas review: 22 October 2026). Check the publisher for amendments before you specify it.
What it covers
Tolerance definitions and gauging
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ANSI/ABMA 4 or the ABMA store.
Open in MechAtlasCheck a drawing callout
Other bearings standards
- ISO/TS 16281 Replaced
Advanced rating life calculation - ISO 15243 Changing
Bearing damage and failure terms and causes - ISO 281 Changing
Rolling bearing rating life - ISO 5753-1 Changing
Radial internal clearance - ISO 76 Changing
Static load ratings - ANSI/ABMA 20 Current
Metric radial ball and roller bearings - ANSI/ABMA 8.2 Current
Locknuts, sleeves, locking devices (inch) - ANSI/ABMA 9 Current
Load ratings and fatigue life for ball bearings - DIN 5415 Current
Rolling bearings - adapter sleeves - DIN 625-1 Current
Radial deep groove ball bearings, single row - DIN 736 Current
Plummer block housings for diameter series 2 bearings - DIN 737 Current
Plummer block housings for diameter series 3 bearings