DIN 5415 Rolling bearings - adapter sleeves
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- DIN 5415:2009-05
- Publisher
- DIN
- Part family
- Bearings
- Reviewed
- 27 October 2026 · source checked
Is DIN 5415 still current?
Yes. DIN 5415:2009-05 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
German dimension standard for adapter sleeves.
Parts that use DIN 5415
- Adapter sleeve, withdrawal sleeve and locknut (Germany (DIN), main)
Tapered sleeve with locknut that fixes a tapered-bore bearing on a plain shaft; used with plummer blocks on conveyors and fans.
Adapter sleeves for rolling bearings.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 5415 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other bearings standards
- ISO/TS 16281 Replaced
Advanced rating life calculation - ISO 15243 Changing
Bearing damage and failure terms and causes - ISO 281 Changing
Rolling bearing rating life - ISO 5753-1 Changing
Radial internal clearance - ISO 76 Changing
Static load ratings - ANSI/ABMA 20 Current
Metric radial ball and roller bearings - ANSI/ABMA 4 Current
Tolerance definitions and gauging - ANSI/ABMA 8.2 Current
Locknuts, sleeves, locking devices (inch) - ANSI/ABMA 9 Current
Load ratings and fatigue life for ball bearings - DIN 625-1 Current
Radial deep groove ball bearings, single row - DIN 736 Current
Plummer block housings for diameter series 2 bearings - DIN 737 Current
Plummer block housings for diameter series 3 bearings