ISO/TS 16281 Advanced rating life calculation
ReplacedNo longer current. Use the replacement shown.
- Edition
- ISO/TS 16281:2008 withdrawn → ISO 16281:2025
- Publisher
- ISO
- Part family
- Bearings
- Reviewed
- 23 October 2026 · source checked
- Use instead
- ISO 16281:2025
Is ISO/TS 16281 still current?
No, it has been replaced. ISO/TS 16281 has been replaced by ISO 16281:2025 (MechAtlas review: 23 October 2026). Use the replacement for new work, and check differences before interchanging parts.
What it covers
Advanced rating life calculation
The technical specification became a full International Standard, ISO 16281:2025.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ISO/TS 16281 or the ISO store.
Open in MechAtlasCheck a drawing callout
Other bearings standards
- ISO 15243 Changing
Bearing damage and failure terms and causes - ISO 281 Changing
Rolling bearing rating life - ISO 5753-1 Changing
Radial internal clearance - ISO 76 Changing
Static load ratings - ANSI/ABMA 20 Current
Metric radial ball and roller bearings - ANSI/ABMA 4 Current
Tolerance definitions and gauging - ANSI/ABMA 8.2 Current
Locknuts, sleeves, locking devices (inch) - ANSI/ABMA 9 Current
Load ratings and fatigue life for ball bearings - DIN 5415 Current
Rolling bearings - adapter sleeves - DIN 625-1 Current
Radial deep groove ball bearings, single row - DIN 736 Current
Plummer block housings for diameter series 2 bearings - DIN 737 Current
Plummer block housings for diameter series 3 bearings