ISO 4762 Socket head cap screws
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- ISO 4762:2004
- Publisher
- ISO
- Part family
- Fasteners & threads
- Reviewed
- 23 October 2026 · source checked
Is ISO 4762 still current?
Yes. ISO 4762:2004 is the latest edition MechAtlas found (MechAtlas review: 23 October 2026). Check the publisher for amendments before you specify it.
What it covers
Socket head cap screws
Equivalent and related standards
| Standard | Relationship | Note |
|---|---|---|
| DIN 912 | Modified adoption — differences listed in the national foreword | |
| JIS B 1176 | Similar purpose — not interchangeable without an engineering check |
“Similar” never means interchangeable without an engineering check.
Parts that use ISO 4762
- Socket head cap screw (ISO / EN, main)
Screw with a round head and hexagon socket, used where space is tight or the head must sit in a counterbore.
Hexagon socket head cap screw ISO 4762 - M8 x 30 - 12.9
Grades: 8.8, 10.9, 12.9 (ISO 898-1); A2/A4 (ISO 3506-1)
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ISO 4762 or the ISO store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)