DIN 6325 Hardened parallel pins m6 (old)

Is DIN 6325 still current?

No, it has been replaced. DIN 6325 has been replaced by ISO 8734 (as DIN EN ISO 8734) (MechAtlas review: 27 October 2026). Use the replacement for new work, and check differences before interchanging parts.

What it covers

Former German hardened dowel pin standard.

Before you interchange parts

• DIN 6325 → ISO 8734 (knowledge — verify): Not in the supplied catalogue. Widely published pairing; confirm before ordering.

Parts that use DIN 6325

• Dowel / parallel pin and spring pin (Germany (DIN), old)
  Precision pin that locates two parts; spring pins are slotted tubes pressed into holes.
  Withdrawn; hardened m6 pins now DIN EN ISO 8734.

Official source

MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 6325 or the DIN store.

Other fasteners & threads standards

• DIN 125-1 Replaced
  Washers, product grade A, up to 250 HV
• DIN 1481 Replaced
  Heavy spring pins (old)
• DIN 2999-1 Replaced
  Whitworth pipe threads (old)
• DIN 6914 Replaced
  HV hex bolts for steel structures (old)
• DIN 7 Replaced
  Parallel pins (old)
• DIN 7337 Replaced
  Break mandrel blind rivets (old)
• DIN 7991 Replaced
  Hexagon socket countersunk head screws
• DIN 9021 Replaced
  Washers, outside diameter about 3 x thread
• DIN 912 Replaced
  Hexagon socket head cap screws (ISO 4762 modified)
• DIN 913 Replaced
  Hexagon socket set screws, flat point (ISO 4026 modified)
• DIN 916 Replaced
  Hexagon socket set screws, cup point (ISO 4029 modified)
• DIN 931-1 Replaced
  Hexagon head bolts with shank (ISO 4014 modified)

All Fasteners & threads standards →