DIN 916 Hexagon socket set screws, cup point (ISO 4029 modified)

Is DIN 916 still current?

No, it has been replaced. DIN 916 has been replaced by ISO 4026–4029 (MechAtlas review: 27 October 2026). Use the replacement for new work, and check differences before interchanging parts.

What it covers

Former German cup point set screw standard.

Before you interchange parts

• DIN 916 → ISO 4029 (knowledge — verify): Not in the supplied catalogue. Widely published pairing; confirm before ordering.

Parts that use DIN 916

• Set screw (grub screw) (Germany (DIN), old)
  Headless screw with a hexagon socket, used to lock a hub, pulley or collar onto a shaft.
  DIN 916 - M8 x 10 - 45H
  Cup point; withdrawn, replaced by DIN EN ISO 4029.

Official source

MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 916 or the DIN store.

Other fasteners & threads standards

• DIN 125-1 Replaced
  Washers, product grade A, up to 250 HV
• DIN 1481 Replaced
  Heavy spring pins (old)
• DIN 2999-1 Replaced
  Whitworth pipe threads (old)
• DIN 6325 Replaced
  Hardened parallel pins m6 (old)
• DIN 6914 Replaced
  HV hex bolts for steel structures (old)
• DIN 7 Replaced
  Parallel pins (old)
• DIN 7337 Replaced
  Break mandrel blind rivets (old)
• DIN 7991 Replaced
  Hexagon socket countersunk head screws
• DIN 9021 Replaced
  Washers, outside diameter about 3 x thread
• DIN 912 Replaced
  Hexagon socket head cap screws (ISO 4762 modified)
• DIN 913 Replaced
  Hexagon socket set screws, flat point (ISO 4026 modified)
• DIN 931-1 Replaced
  Hexagon head bolts with shank (ISO 4014 modified)

All Fasteners & threads standards →