DIN 1481 Heavy spring pins (old)
ReplacedNo longer current. Use the replacement shown.
- Edition
- DIN 1481:1978-11
- Publisher
- DIN
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
- Use instead
- ISO 8752 (as DIN EN ISO 8752)
Is DIN 1481 still current?
No, it has been replaced. DIN 1481 has been replaced by ISO 8752 (as DIN EN ISO 8752) (MechAtlas review: 27 October 2026). Use the replacement for new work, and check differences before interchanging parts.
What it covers
Former German heavy slotted spring pin standard.
Before you interchange parts
- DIN 1481 → ISO 8752 / EN ISO 8752 (stated by catalogue): Spring type straight pin, heavy duty
Parts that use DIN 1481
- Dowel / parallel pin and spring pin (Germany (DIN), old)
Precision pin that locates two parts; spring pins are slotted tubes pressed into holes.
Withdrawn; heavy spring pins now DIN EN ISO 8752.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 1481 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified) - DIN 931-1 Replaced
Hexagon head bolts with shank (ISO 4014 modified)