ISO 15983 Open end blind rivets, break pull mandrel, protruding head - A2/A2
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- ISO 15983:2002
- Publisher
- ISO
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is ISO 15983 still current?
Yes. ISO 15983:2002 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
Stainless steel body and mandrel blind rivets.
Parts that use ISO 15983
- Rivets (solid and blind) (ISO / EN, main)
Permanent pin fastener: solid rivets are hammered/closed, blind rivets are set from one side.
Blind rivet ISO 15983 - 4,8 x 12 - A2/A2
Grades: A2/A2 stainless
One of ISO 15973-15984 series by material pair.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ISO 15983 or the ISO store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)