ISO 10642 Hexagon socket countersunk head screws
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- ISO 10642:2026
- Publisher
- ISO
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is ISO 10642 still current?
Yes. ISO 10642:2026 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
Socket drive countersunk (flat) head screws.
Parts that use ISO 10642
- Countersunk head screw (ISO / EN, main)
Screw with a cone-shaped head that sits flush in a countersunk hole; socket or slotted drive.
Hexagon socket countersunk head screw ISO 10642 - M8 x 25 - 10.9
Grades: Classes per ISO 898-1
Socket drive; new 2026 edition.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ISO 10642 or the ISO store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)