IS 2643 Pipe threads where pressure-tight joints are not made on the threads
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- IS 2643 (edition unconfirmed)
- Publisher
- IS
- Part family
- Fasteners & threads
- Reviewed
- — · source not yet checked
Is IS 2643 still current?
Yes. IS 2643 (edition unconfirmed) is the latest edition MechAtlas found. Check the publisher for amendments before you specify it.
What it covers
Indian parallel fastening pipe thread (G); edition unconfirmed.
Parts that use IS 2643
- Pipe threads (BSP / NPT) (India (IS), main)
Inch-sized threads on pipes and fittings: taper threads seal on the thread, parallel threads need a gasket.
G 1/2
Parallel fastening pipe threads (edition unconfirmed).
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for IS 2643 or the IS store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)