IS 10102 Technical supply conditions for rivets
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- IS 10102:1982
- Publisher
- IS
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is IS 10102 still current?
Yes. IS 10102:1982 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
General supply and inspection conditions for rivets.
Parts that use IS 10102
- Rivets (solid and blind) (India (IS), related)
Permanent pin fastener: solid rivets are hammered/closed, blind rivets are set from one side.
Technical supply conditions for rivets.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for IS 10102 or the IS store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)