EN 10226-2 Pipe threads, pressure-tight - taper external / taper internal
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- EN 10226-2:2005
- Publisher
- EN
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is EN 10226-2 still current?
Yes. EN 10226-2:2005 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
European sealing pipe thread with R male and Rc female.
Parts that use EN 10226-2
- Pipe threads (BSP / NPT) (ISO / EN, main)
Inch-sized threads on pipes and fittings: taper threads seal on the thread, parallel threads need a gasket.
R 1/2 / Rc 1/2
Taper external with taper internal thread.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for EN 10226-2 or the EN store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)