DIN 976-1 Stud bolts - metric thread
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- DIN 976-1:2016-09
- Publisher
- DIN
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is DIN 976-1 still current?
Yes. DIN 976-1:2016-09 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
Metric stud bolts and threaded rods.
Before you interchange parts
- DIN 976 → ISO (no ISO equivalent): Successor of DIN 975 for threaded rods; no ISO equivalent.
Parts that use DIN 976-1
- Stud bolt / threaded rod (Germany (DIN), main)
Rod threaded at both ends or full length, used with two nuts for flanges, housings and long clamps.
DIN 976-1 - M16 x 200 - 8.8
Grades: ISO 898-1 classes
Stud bolts / threaded rod, metric thread (2016, current).
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 976-1 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)