DIN 963 Slotted countersunk head screws
ReplacedNo longer current. Use the replacement shown.
- Edition
- DIN 963:1990-08
- Publisher
- DIN
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
- Use instead
- ISO 2009
Is DIN 963 still current?
No, it has been replaced. DIN 963 has been replaced by ISO 2009 (MechAtlas review: 27 October 2026). Use the replacement for new work, and check differences before interchanging parts.
What it covers
Former German slotted countersunk screw standard.
Before you interchange parts
- DIN 963 → ISO 2009 / EN ISO 2009 (stated by catalogue): Slotted countersunk flat head screw
Parts that use DIN 963
- Countersunk head screw (Germany (DIN), old)
Screw with a cone-shaped head that sits flush in a countersunk hole; socket or slotted drive.
Slotted; withdrawn, replaced by DIN EN ISO 2009.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 963 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)