DIN 6799 Retaining washers (E-rings) for shafts
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- DIN 6799:2026-05
- Publisher
- DIN
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is DIN 6799 still current?
Yes. DIN 6799:2026-05 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
E-type retaining washers pushed radially onto shaft grooves.
Before you interchange parts
- DIN 6799 → ISO (no ISO equivalent): Retaining washer (E-clip) for shafts
Parts that use DIN 6799
- Circlip / retaining ring (Seeger) (Germany (DIN), main)
Spring steel ring in a groove that stops a bearing, gear or pin moving along a shaft or bore.
Retaining washer DIN 6799 - 6
E-type retaining washers for shafts; 2026-05 edition.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 6799 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)