DIN 529 Masonry and foundation bolts
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- DIN 529:2010-09
- Publisher
- DIN
- Part family
- Fasteners & threads
- Reviewed
- 27 October 2026 · source checked
Is DIN 529 still current?
Yes. DIN 529:2010-09 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
Shapes and sizes of bolts M8-M72x6 for setting in masonry and concrete foundations.
Parts that use DIN 529
- Foundation / anchor bolt (Germany (DIN), main)
Bolt cast or grouted into concrete to hold machines, columns and base plates down.
DIN 529 M20 x 400 - 4.6
Grades: Class 4.6 per ISO 898-1 (proof loads up to M39)
Masonry and foundation bolts M8 to M72x6; several shank shapes.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for DIN 529 or the DIN store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)