ASME B18.22.1 Plain washers (inch)
WithdrawnWithdrawn with no direct replacement.
- Edition
- ASME B18.22.1-1965 (R2008) - status unconfirmed
- Publisher
- ASME
- Part family
- Fasteners & threads
- Reviewed
- — · source not yet checked
Is ASME B18.22.1 still current?
No, it is withdrawn. ASME B18.22.1 is withdrawn with no direct replacement. Check with the publisher what to use for new work.
What it covers
Older inch plain washer standard; ANSI lists it as historical.
Parts that use ASME B18.22.1
- Flat washer (USA (ASME / ASTM), old)
Thin flat ring placed under a nut or bolt head to spread load and protect the surface.
Plain washers (1965); listed as historical by ANSI.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ASME B18.22.1 or the ASME store.
Open in MechAtlasCheck a drawing callout
Other fasteners & threads standards
- DIN 125-1 Replaced
Washers, product grade A, up to 250 HV - DIN 1481 Replaced
Heavy spring pins (old) - DIN 2999-1 Replaced
Whitworth pipe threads (old) - DIN 6325 Replaced
Hardened parallel pins m6 (old) - DIN 6914 Replaced
HV hex bolts for steel structures (old) - DIN 7 Replaced
Parallel pins (old) - DIN 7337 Replaced
Break mandrel blind rivets (old) - DIN 7991 Replaced
Hexagon socket countersunk head screws - DIN 9021 Replaced
Washers, outside diameter about 3 x thread - DIN 912 Replaced
Hexagon socket head cap screws (ISO 4762 modified) - DIN 913 Replaced
Hexagon socket set screws, flat point (ISO 4026 modified) - DIN 916 Replaced
Hexagon socket set screws, cup point (ISO 4029 modified)