JIS G 3192 Hot rolled steel sections: dimensions and tolerances
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- JIS G 3192:2024
- Publisher
- JIS
- Part family
- Steel grades & sections
- Reviewed
- 27 October 2026 · source checked
Is JIS G 3192 still current?
Yes. JIS G 3192:2024 is the latest edition MechAtlas found (MechAtlas review: 27 October 2026). Check the publisher for amendments before you specify it.
What it covers
Dimensions, shape, mass and permissible variations of hot rolled steel sections.
Parts that use JIS G 3192
- I-beam (taper flange) (Japan (JIS), main)
Hot-rolled I-shaped beam with sloping (taper) inner flange faces, used for general frames, supports and runway beams.
Dimensions and tolerances of hot rolled sections. - Wide-flange / parallel flange H-beam (Japan (JIS), main)
Hot-rolled I or H section with parallel flange faces, used for columns, main beams, crane girders and pipe racks.
Dimensions and tolerances of hot rolled sections. - Channel (C / U section) (Japan (JIS), main)
Hot-rolled U-shaped section used for frames, purlins, bracing, conveyor stringers and platforms.
Dimensions and tolerances of hot rolled sections. - Equal and unequal angle (Japan (JIS), main)
Hot-rolled L-shaped section used for bracing, frames, supports, cleats and edge protection.
Dimensions and tolerances of hot rolled sections.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for JIS G 3192 or the JIS store.
Open in MechAtlasCheck a drawing callout
Other steel grades & sections standards
- EN 10277 Replaced
Bright steel products - IS 2062 Replaced
Hot-rolled structural steel - DIN 1025-2 Withdrawn
Wide flange I-beams (IPB / HEB series) - IS 12778 Withdrawn
Parallel flange beams, columns and bearing piles - EN 10210-1 / 10219-1 Changing
Hot-finished / cold-formed hollow sections - ASTM A105/A105M Current
Carbon steel piping forgings - ASTM A108 Current
Cold-finished carbon and alloy steel bars - ASTM A1085 Current
Cold-formed welded carbon steel HSS - ASTM A240/A240M Current
Stainless plate, sheet & strip - ASTM A29 Current
General requirements for hot-wrought steel bars - ASTM A36/A36M Current
Carbon structural steel - ASTM A572 / A992 / A500 / A514 Current
HSLA, W-shapes, HSS, Q&T plate