EN 10210-1 / 10219-1 Hot-finished / cold-formed hollow sections
ChangingA new edition or revision is being prepared. Check before you specify.
- Edition
- 2006, revisions drafting
- Publisher
- EN
- Part family
- Steel grades & sections
- Reviewed
- 22 October 2026 · source checked
Is EN 10210-1 / 10219-1 still current?
Yes, but a revision is coming. It is still in use, but a revision is in progress. The current reference is 2006, revisions drafting (MechAtlas review: 22 October 2026). Check the publisher before you specify it.
What it covers
Hot-finished / cold-formed hollow sections
Equivalent and related standards
| Standard | Relationship | Note |
|---|---|---|
| ASTM A500 | Similar purpose — not interchangeable without an engineering check |
“Similar” never means interchangeable without an engineering check.
Parts that use EN 10210-1 / 10219-1
- Hollow section (RHS / SHS / CHS) (Europe (EN), main)
Steel tube with round, square or rectangular section used for columns, trusses, handrails and frames.
10210 hot finished; 10219 cold formed welded.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for EN 10210-1 / 10219-1 or the EN store.
Open in MechAtlasCheck a drawing callout
Other steel grades & sections standards
- EN 10277 Replaced
Bright steel products - IS 2062 Replaced
Hot-rolled structural steel - DIN 1025-2 Withdrawn
Wide flange I-beams (IPB / HEB series) - IS 12778 Withdrawn
Parallel flange beams, columns and bearing piles - ASTM A105/A105M Current
Carbon steel piping forgings - ASTM A108 Current
Cold-finished carbon and alloy steel bars - ASTM A1085 Current
Cold-formed welded carbon steel HSS - ASTM A240/A240M Current
Stainless plate, sheet & strip - ASTM A29 Current
General requirements for hot-wrought steel bars - ASTM A36/A36M Current
Carbon structural steel - ASTM A572 / A992 / A500 / A514 Current
HSLA, W-shapes, HSS, Q&T plate - ASTM A6/A6M Current
General requirements, rolled shapes and plate