EN 10365 Hot-rolled channels, I and H sections
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- 2026; replaces 2017
- Publisher
- EN
- Part family
- Steel grades & sections
- Reviewed
- 12 October 2026 · source checked
Is EN 10365 still current?
Yes. 2026; replaces 2017 is the latest edition MechAtlas found (MechAtlas review: 12 October 2026). Check the publisher for amendments before you specify it.
What it covers
Dimensions and masses for selected structural sections.
Edition research: 2017
- Material
- Steel
- Typical application
- Structures
- What you specify
- Section series; height; width; web; flange
- Watch out
- Material grade is specified under a separate material standard.
Equivalent and related standards
| Standard | Relationship | Note |
|---|---|---|
| IS 808 / ASTM A6 | Similar purpose — not interchangeable without an engineering check |
“Similar” never means interchangeable without an engineering check.
Parts that use EN 10365
- I-beam (taper flange) (Europe (EN), main)
Hot-rolled I-shaped beam with sloping (taper) inner flange faces, used for general frames, supports and runway beams.
European dimensions for I, H and U sections. - Wide-flange / parallel flange H-beam (Europe (EN), main)
Hot-rolled I or H section with parallel flange faces, used for columns, main beams, crane girders and pipe racks.
IPE 300 / HEB 300 (examples)
Dimensions of IPE, HE (A/B/M) and other series. - Channel (C / U section) (Europe (EN), main)
Hot-rolled U-shaped section used for frames, purlins, bracing, conveyor stringers and platforms.
UPN 200 / UPE 200 (examples)
European U section dimensions.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for EN 10365 or the EN store.
Open in MechAtlasCheck a drawing callout
Other steel grades & sections standards
- EN 10277 Replaced
Bright steel products - IS 2062 Replaced
Hot-rolled structural steel - DIN 1025-2 Withdrawn
Wide flange I-beams (IPB / HEB series) - IS 12778 Withdrawn
Parallel flange beams, columns and bearing piles - EN 10210-1 / 10219-1 Changing
Hot-finished / cold-formed hollow sections - ASTM A105/A105M Current
Carbon steel piping forgings - ASTM A108 Current
Cold-finished carbon and alloy steel bars - ASTM A1085 Current
Cold-formed welded carbon steel HSS - ASTM A240/A240M Current
Stainless plate, sheet & strip - ASTM A29 Current
General requirements for hot-wrought steel bars - ASTM A36/A36M Current
Carbon structural steel - ASTM A572 / A992 / A500 / A514 Current
HSLA, W-shapes, HSS, Q&T plate