EN 10056-1 Equal and unequal leg angles
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- 2017
- Publisher
- EN
- Part family
- Steel grades & sections
- Reviewed
- 12 October 2026 · source checked
Is EN 10056-1 still current?
Yes. 2017 is the latest edition MechAtlas found (MechAtlas review: 12 October 2026). Check the publisher for amendments before you specify it.
What it covers
Dimensional reference for structural steel angles.
- Material
- Steel
- Typical application
- Structures
- What you specify
- Leg lengths; thickness; root radius
- Watch out
- Verify tolerances and material grade separately.
Parts that use EN 10056-1
- Equal and unequal angle (Europe (EN), main)
Hot-rolled L-shaped section used for bracing, frames, supports, cleats and edge protection.
L 100x100x10 (example)
Dimensions of equal and unequal angles.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for EN 10056-1 or the EN store.
Open in MechAtlasCheck a drawing callout
Other steel grades & sections standards
- EN 10277 Replaced
Bright steel products - IS 2062 Replaced
Hot-rolled structural steel - DIN 1025-2 Withdrawn
Wide flange I-beams (IPB / HEB series) - IS 12778 Withdrawn
Parallel flange beams, columns and bearing piles - EN 10210-1 / 10219-1 Changing
Hot-finished / cold-formed hollow sections - ASTM A105/A105M Current
Carbon steel piping forgings - ASTM A108 Current
Cold-finished carbon and alloy steel bars - ASTM A1085 Current
Cold-formed welded carbon steel HSS - ASTM A240/A240M Current
Stainless plate, sheet & strip - ASTM A29 Current
General requirements for hot-wrought steel bars - ASTM A36/A36M Current
Carbon structural steel - ASTM A572 / A992 / A500 / A514 Current
HSLA, W-shapes, HSS, Q&T plate