EN 10025-2 Non-alloy structural steels
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- 2019
- Publisher
- EN
- Part family
- Steel grades & sections
- Reviewed
- 12 October 2026 · source checked
Is EN 10025-2 still current?
Yes. 2019 is the latest edition MechAtlas found (MechAtlas review: 12 October 2026). Check the publisher for amendments before you specify it.
What it covers
Delivery conditions for hot-rolled non-alloy structural steels.
Edition research: 2019
- Material
- Carbon steel
- Typical application
- Structures
- What you specify
- Product form; thickness; delivery condition
- Watch out
- S235, S275 and S355 families; subgrade and toughness matter.
Equivalent and related standards
| Standard | Relationship | Note |
|---|---|---|
| IS 2062 / ASTM A36 / A572 / JIS G3101 | Similar purpose — not interchangeable without an engineering check |
“Similar” never means interchangeable without an engineering check.
Parts that use EN 10025-2
- Wide-flange / parallel flange H-beam (Europe (EN), material)
Hot-rolled I or H section with parallel flange faces, used for columns, main beams, crane girders and pipe racks.
Grades: S235 / S275 / S355 - Steel plate (Europe (EN), material)
Flat hot-rolled steel 3 mm and thicker, used for base plates, gussets, liners, chutes and fabricated parts.
Grades: S235 / S275 / S355 / S460
Grade and properties. - Flat bar (Europe (EN), material)
Hot-rolled rectangular bar used for brackets, stiffeners, wear strips, frames and fabrication.
Grades: S235 / S275 / S355 - Structural steel grade (Europe (EN), main)
The material grade for structural sections and plates, which sets strength, toughness and weldability.
S355J2+N (example)
Grades: S235 / S275 / S355 / S460 / S500
Non-alloy structural steels; 2019 edition.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for EN 10025-2 or the EN store.
Open in MechAtlasCheck a drawing callout
Other steel grades & sections standards
- EN 10277 Replaced
Bright steel products - IS 2062 Replaced
Hot-rolled structural steel - DIN 1025-2 Withdrawn
Wide flange I-beams (IPB / HEB series) - IS 12778 Withdrawn
Parallel flange beams, columns and bearing piles - EN 10210-1 / 10219-1 Changing
Hot-finished / cold-formed hollow sections - ASTM A105/A105M Current
Carbon steel piping forgings - ASTM A108 Current
Cold-finished carbon and alloy steel bars - ASTM A1085 Current
Cold-formed welded carbon steel HSS - ASTM A240/A240M Current
Stainless plate, sheet & strip - ASTM A29 Current
General requirements for hot-wrought steel bars - ASTM A36/A36M Current
Carbon structural steel - ASTM A572 / A992 / A500 / A514 Current
HSLA, W-shapes, HSS, Q&T plate