ISO 286-1 Limits and fits — fundamentals
CurrentLatest edition found. Still confirm amendments with the publisher.
- Edition
- ISO 286-1:2010 + Cor 1:2013
- Publisher
- ISO
- Part family
- Tolerances & drawings
- Reviewed
- 23 October 2026 · source checked
Is ISO 286-1 still current?
Yes. ISO 286-1:2010 + Cor 1:2013 is the latest edition MechAtlas found (MechAtlas review: 23 October 2026). Check the publisher for amendments before you specify it.
What it covers
Tolerance and fit system for linear sizes including shafts and holes.
- Material
- Steel
- Typical application
- General machinery
- What you specify
- Nominal size; tolerance grade; deviation
- Watch out
- Select shaft/hole fits for load, assembly and operating temperature.
Official source
MechAtlas does not reproduce standards. Check the official edition at the publisher's page for ISO 286-1 or the ISO store.
Open in MechAtlasCheck a drawing callout
Other tolerances & drawings standards
- ISO 10303-242 Changing
STEP AP242 model-based 3D - ISO 129-1 Changing
Dimensioning - ISO 21920-1/-2/-3 Changing
Surface texture profile: drawing indication, parameters, operators - ISO 2768-1 Changing
General tolerances, linear and angular - ASME B46.1 Current
Surface texture (US) - ASME Y14.5 Current
US GD&T - ISO 1101 Current
Form, orientation, location, run-out - ISO 128-1 / -2 / -3 Current
Drawing presentation, lines, views & sections - ISO 22081 Current
General geometrical specifications - ISO 286-1 / -2 Current
Limits and fits: basis; hole/shaft tables - ISO 5457 / 7200 / 7573 Current
Sheet sizes; title block; parts list (BOM) - ISO 5459 / 8015 / 14405-1 / 2692 Current
Datums; GPS fundamentals; linear sizes; MMR/LMR